In coming months the Occupational Safety and Health Administration will hold public hearings on one of its most far-reaching new regulations in recent years. OSHA’s proposed silica rule would affect more than 2 million workers in construction, oil and gas exploration, manufacturing, and any work that involves silica-containing materials such as soil, dirt, sand, rock, brick, pavement or concrete.
Because silica is so ubiquitous and the impact of any rule so widespread some in Congress and in industry have expressed concern over any unnecessary impact on jobs and the economy.
Much of OSHA’s proposed rule is modeled on the successful voluntary occupational health program established more than 30 years ago by the country’s leading sand-producing companies through the National Industrial Sand Association. Those companies have virtually eliminated silicosis from their workplaces.
The proposed OSHA regulations would mandate for the first time many new and long overdue worker protection provisions, including silica dust controls, dust monitoring, and medical surveillance of employees, similar to those developed voluntarily by the sand companies. However, OSHA also is calling for cutting the current permissible exposure limit for silica in half, which is not necessary. Sand industry experience shows that with proper dust controls and dust monitoring, workers have been and can continue to be protected at the current limit.
The inhalation of tiny crystalline silica particles, which come from silica-containing materials, can cause silicosis, a potentially disabling and sometimes fatal lung disease. Silicosis is completely preventable, and government and employers must do everything necessary to protect workers.
NISA’s member companies mine and process the sand used in glass, oil and gas well stimulation, foundries, paint, water filtration and even the sand on your local golf course. These companies produce essentially 100 percent crystalline silica, so they are well aware of the potential health effects for workers overexposed to respirable crystalline silica.
The sand industry’s commitment to stopping silicosis led to the establishment of NISA’s voluntary silicosis prevention program in the 1970s. With the assistance of occupational health experts, the companies develop and maintain state-of-the-art dust control and dust monitoring protocols in their workplaces and medical surveillance of their employees.
The sand companies’ more than 30 years of experience shows that companies can successfully protect workers at the current permissible exposure limit of 100 micrograms per cubic meter of air. In other words, reducing the exposure limit from 100 to 50 micrograms is not the key to eliminating silicosis in American workplaces. Rather, the key is a government and industry commitment to adhere to the strict dust controls, dust monitoring and medical surveillance that OSHA now has included in its proposed rule, and strict compliance with the current permissible exposure limit.
Unfortunately, and tragically, much of industry is not now complying with the current rule. Even after years of focused enforcement efforts, OSHA records show that about 30 percent of the samples it takes exceed the current permissible exposure limit.
Rep. Elijah Cummings, D-Md., right, hugs Harold Schaitberger, General President of the International Association of Fire Fighters, after the Congressman spoke at the IAFF's Legislative Conference General Session at the Hyatt Regency on Capitol Hill, March 9, 2015. The day featured addresses by members of Congress and Vice President Joe Biden.